| 1. | The fixed end moments acting on the member are ignored for the moment .
作用于该杆上的固端力矩暂且都不考虑。 |
| 2. | In the calculation of fixed end moments, joints b and c are temporarily locked .
在计算固端弯矩时，临时锁住共点B和C。 |
| 3. | In the calculation of fixed end moments , joints b and c are temporarily locked
在计算固端弯矩时，临时锁住共点b和c 。 |
| 4. | Fixed end moment
固端弯矩 |
| 5. | Fixed end arch
固定端拱 |
| 6. | Flow externally molded onto the body to indicate the fixed end containing a tfe seat
流向)模铸在阀体的外部，表示配置tfe阀座的固定端口。 |
| 7. | Vibration and stability are investigated for an axially moving beam constrained by a pinned end and a fixed end
摘要研究一端简支一端固支轴向运动梁的横向振动和稳定性。 |
| 8. | Another theory is that having a greater mass under the fixed end of the reed somehow improves the vibratory properties of the reed itself
还有一个理论认为簧片固定端下面较大的质量会提升簧片的振动特性。 |
| 9. | In this paper , the lamination board models with fixed ends were established with marc and the mode analysis was carried on
摘要用有限元软件marc建立了具有脱层和无脱层的两端固支层合板模型，并进行了模态分析。 |
| 10. | The two different boundary conditions considered are simply supported and fixed end support , and the different damage forms ( crack characteristics ) are investigated by numerical experiments
对不同的边界条件（如简支梁和固端梁）下不同的损伤形式（如竖直裂缝和斜裂缝）引起结构损伤的情况进行试验。 |
